To clean ully Natural we recommend using lukewarm water and natural soap

In case of dry stains or if the dirt is more spread out, you can use a fine-grit sandpaper lightly applied to the surface to clean it following the direction of the wood grain to avoid leaving scratches.

To protect the wood naturally you can treat your ully with a natural protective wax to be applied with a cotton cloth. The wax takes several days to dry completely and should be returned every 6-12 months depending on use. You can find different types on Amazon such as this.

If you would like to have even more protection, you can treat your ully with one or two coats of a water-based transparent finish like this. First you have to apply it on the wood with a brush, then you have to sand the wood with a fine paper and finally you have to apply a second coat.

To protect your floor from possible scratches, we have added 8 soft felt pads to ully Natural, which we recommend placing under each leg before use (2 per leg).